CS701
Isolated Signal Generator (0-65MHz, sine wave only) for serial numbers above 4000. The CS701 is rated at 300V RMS isolation (class III), and offers output levels from 1 mVp-p to 7 V p-p
Isolated Signal Generator (0-65MHz, sine wave only) for serial numbers above 4000. The CS701 is rated at 300V RMS isolation (class III), and offers output levels from 1 mVp-p to 7 V p-p
The CS740 is a USB interface which operates USB 2.0, and offers sustained transfer rates of about 20 Mbyte/sec.
The CS741 is an Ethernet interface, which operates at 100 Mbit/sec, or about 6 Mbyte/sec sustained throughput. In normal use, there is no discernible difference in performance between the CS740 and CS741.
Test Fixtures - three boards, one for low impedance (1mOhm - 1kOhm), another for high impedance (1 ohm - 25kOhm), and the third for transformer testing (B-H, X primary, X leakage, Cww, N, and Xmutual)
USB-to-USB Isolator protects your PC or Laptop while connecting USB peripherals wired to high voltages.
Analog Probe 200x 300MHz, 1.5kVrms
The CS740 is a USB interface which operates USB 2.0, and offers sustained transfer rates of about 20 Mbyte/sec.
The CS741 is an Ethernet interface, which operates at 100 Mbit/sec, or about 6 Mbyte/sec sustained throughput. In normal use, there is no discernible difference in performance between the CS740 and CS741. However the Ethernet is transformer isolated to 15
The CS1070 Power Amplifier is used to amplify the output of the CS700A or CS701 signal generators.
4 Channel link cable. Allows two scopes to be linked together to give 4 analog and 16 digital channels. Requires the four channel software to be installed.
Analog Probe 1x / 10x 250MHz, x1 300V, x10 600V
Analog Probe 100x 250MHz, 1.5kVrms