The FS730/5 Series Distribution Amplifier are used to distribute broadband (DC to 100 MHz) analog signals over 75 Ω coax. 详细
The FS730/4 Series Distribution Amplifiers are used to distribute broadband (DC to 100 MHz) analog signals over 50 Ω coax. 详细
The FS730/3 Series Distribution Amplifiers are used to distribute CMOS level logic pulses. Each amplifier has one input and seven outputs, all on BNC connectors. All inputs and outputs are logic levels. 详细
The FS730/FS735 Series Distribution Amplifiers are used to distribute a low noise 5 MHz frequency reference. 详细
For installations which require many 10 MHz outputs at a remote location from the source, the FS710 AGC Distribution Amplifier offers seven independent outputs from one input. With an AGC circuit capable of adding up to 30 dB of gain, this amplifier can b 详细
The FS730/FS735 Series Distribution Amplifiers are used to distribute a low noise 10 MHz frequency reference. Each system has one input and seven outputs, all on BNC connectors. The input is coupled through a series LC network allowing the use of inputs w 详细
The SR625 Frequency Counter is a NIST traceable frequency counting standard for calibrating base stations, 详细
The SR620 Time Interval Counter performs virtually all of the time and frequency measurements required in a laboratory or ATE environment. 详细
The SC10 is a high stability ovenized 10 MHz quartz oscillator that combines excellent phase noise, Allan variance, and aging characteristics. 详细
The FS752 GNSS Disciplined Time and Frequency Reference provides calibrated time and frequency distribution to your laboratory. 详细
