上海伽桀测控,高性价比测试及应用解决方案服务商
  • 13918448710
  • 点击QQ在线咨询
  • 地址:上海市嘉定区德富路1198号太湖世家国际大厦907室

Schwarzbeck

您的位置:首页 > 产品展示 > 射频微波/EMC > Schwarzbeck

Biconical Antennas

Biconical Antennas have dipole like characteristics (e.g. circular directional pattern in the H-plane,"8"-shaped in the E-plane, fixed phase center, comparable gain), with an enormous wide bandwidth achieved by the double cone elements. One of the earliest and worldwide most popular biconical antenna designs is the BBA 9106 with balun VHA 9103 B. During the last years a growing need for expanded frequency ranges arised, which led to the design of biconical antennas reaching down to frequencies of 20 MHz and up to 18 GHz and above. A further increase of bandwidth was achieved with qualified 4:1 baluns, providing a typical gain increase of approx. 6 dB at the lower frequency range. The biconical elements can be mounted and dismounted within a few seconds providing perfect contact repeatability thanks to special clamping fixtures. A small wrench made of insulating material is supplied with the balun, it is tied to the balun head and thus always available whenever needed. Biconical antennas can be used for many applications, in which half-wave dipoles have been used traditionally. An enormous reduction of measurement time can be achieved, because the time consuming tuning of the antenna elements to the half wavelength is not needed, an important condition for sweeped broadband measurements. In typical dipole applications several discrete frequencies are measured, in contrast the biconical antenna allows continuous sweeps, where site anomalies are discovered much easier.

Typical applications for biconical antennas are:

  • Broadband RX-antenna for emission testing (20-300 MHz)
  • TX-antenna for immunity testing, especially at low frequencies
  • Measurements of shielding effectiveness
  • Evaluation of test sites e.g. anechoic rooms (FAC) and open area test sites (OATS)
  • Passive field probe for immunity testing

A big variety of baluns and biconical elements allows to choose the optimum antenna for each specific application. The baluns marked with "RX" are especially designed for receiving applications (because of their superior symmetry), the baluns marked with "TX" are suitable for immunity testing with high power.

 

BBA 9106 biconical elements with different antenna holder/balun combinations

BBA 9106 + VHA 9103 B

BBA 9106 biconical elements in combination with the VHA 9103B antenna holder/balun.

30 - 300 MHz

10 W

RX

 

BBA 9106 + VHBB 9124

BBA 9106 biconical elements in combination with the VHBB 9124 antenna holder/balun.

30 - 300 MHz

10 W

RX

 

BBA 9106 + HFBA 9122

HFBA 9122 broadband balun/holder with BBA 9106 biconical elements especially to measure very high field strength. 

(0.1) 0.15 - 300 (500) MHz

 

BBA 9106 + VHBA 9123

VHBA 9123 broadband balun/holder with BBA 9106 biconical elements.

30 - 300 MHz

TX

100 W

 

BBA 9106 + VHBC 9133

VHB 9133 broadband balun/holder with BBA 9106 biconical elements.

30 - 300 MHz

TX

1 KW

 

BBA 9106 + VHBD 9134

VHBD 9134 broadband balun/holder with BBA 9106 biconical elements.

30 - 200 MHz

TX

2.5 KW

 

BBAL 9136 biconical elements with different antenna holder/balun combinations

BBAL 9136 + VHA 9103 B

BBAL 9136 biconical elements in combination with the VHA 9103B antenna holder/balun.

20 - 200 MHz

10 W

RX

 

BBAL 9136 + VHBB 9124

BBAL 9136 biconical elements in combination with the VHBB 9124 antenna holder/balun.

20 - 200 MHz

10 W

RX

 

BBAL 9136 + HFBA 9122

HFBA 9122 broadband balun/holder with BBAL 9136 biconical elements especially to measure very high field strength.

(0.1) 0.15 - 300 (500) MHz

10W

 

BBAL 9136 + VHBA 9123

VHBA 9123 broadband balun/holder with BBAL 9136 biconical elements.

20 - 200 MHz

TX

100 W

 

BBAL 9136 + VHBC 9133

VHB 9133 broadband balun/holder with BBAL 9136 biconical elements.

20 - 200 MHz

TX

1 KW

 

BBAL 9136 + VHBD 9134

VHBD 9134 broadband balun/holder with BBAL 9136 biconical elements.

20 - 200 MHz

TX

2.5 KW

 

BBAK 9137 biconical elements with different antenna holder/balun combinations

BBAK 9137 + VHA 9103 B

BBAK 9137 biconical elements in combination with the VHA 9103B antenna holder/balun.

45 - 450 MHz

10 W

RX

 

BBAK 9137 + HFBA 9122

HFBA 9122 broadband balun/holder with BBAK 9137 biconical elements especially to measure very high field strength.

 (0.1) 0.15 - 300 (500) MHz

 10W

 

 

BBAK 9137 + VHBB 9124

BBAK 9137 biconical elements in combination with the VHBB 9124 antenna holder/balun.

45 - 450 MHz

10 W

RX

 

BBVK 9138 biconical elements with different antenna holder/balun combinations

BBVK 9138 + VHA 9103 B

BBVK 9138 biconical elements in combination with the VHA 9103B antenna holder/balun.

60 - 600 MHz

10 W

RX

 

BBVK 9138 + HFBA 9122

HFBA 9122 broadband balun/holder with BBVK 9137 biconical elements.

(0.1) 0.15 - 300 (500) MHz

10W

 

BBVK 9138 + VHBB 9124

BBVK 9138 biconical elements in combination with the VHBB 9124 antenna holder/balun.

60 - 600 MHz

10 W

RX

 

BBVU 9135 + UBAA 9114

BBVU 9135 biconical elements in combination with the UBAA 9114 antenna holder/balun.

low-loss

30 - 1000 MHz

5 W

RX

 

BBVU 9135 + UBAA 9115

BBVU 9135 biconical elements in combination with the UBAA 9115 antenna holder/balun.

extremely high symmetry

30 - 1000 MHz

5 W

RX

 

BBUK 9139 biconical elements with different antenna holder/balun combinations

BBUK 9139 + UBAA 9114

BBUK 9139 biconical elements in combination with the UBAA 9114 antenna holder/balun.

low-loss

30 - 1200 MHz

5 W

RX

 

BBUK 9139 + UBAA 9115

BBUK 9139 biconical elements in combination with the UBAA 9115 antenna holder/balun.

extremely high symmetry

30 - 1200 MHz

5 W

RX

 

SBA 9113 B

small biconical antenna

80 MHz - 3 GHz

for harmonics measurements acc. to IEC61000-4-3

 

SBA 9113

small biconical microwave antenna

0.5 - 3 GHz

20 W

miniversion on request

CISPR16-1-4:2007-02 Ed. 2.0

Site validation above 1 GHz

 

420 NJ

Elements for radiated immunity caused by hand portable transmitters

with SBA 9113 or SBA 9113 mini version for the Ford standard RI115 (Ford EMC CS 2009)

Option:

Opt: Spacer 50

Spacer made of Polystyrene to set the 420 NJ elements test distance to 50 mm.

 

SBA 9112

small biconical microwave antenna

(1) 3 - 18 GHz

10 W

including transport case

CISPR16-1-4:2007-02 Ed. 2.0

The SBA 9112 are compliant to CISPR 16-1-4 for site validation above 1 GHz.

Site validation above 1 GHz

(Site-VSWR)

mini version on request

 

SBA 9119

small biconical microwave antenna

1 - 6 GHz

20 W

The SBA 9119 are compliant to CISPR 16-1-4 for site validation above 1 GHz.

Including transport case.

 

UBA 9116

Biconical UHF broadband antenna

(160) 300 -1000 (1100) MHz

 

VUBA 9117

Biconical VHF-UHF broadband antenna

(30) 150 -1000 MHz

 

RS 16

Vertical polarized microwave biconical antenna

(0,5) 1 - 6 (8,5) GHz

with omni directional H-plane pattern

 

RE 1790

Vertical polarized VHF- UHF biconical antenna

(170) 230 - 1000 (1100) MHz

with omni directional H-plane pattern

 

RE 4590

Vertical polarized VHF- UHF biconical antenna

(330) 450 - 1000 (1100) MHz

with omni directional H-plane pattern

 

 RS 0460

Vertically polarised symmetrical biconical antenna

0,4 - 6 GHz

omnidirectional in the H-plane.

 

 

 

 

 

上一篇:Dipoles

下一篇:Antenna Holders / Baluns

回到顶部